Load Miser Energy Divider Controller
IDEAL FOR COST AND ENERGY SAVINGS, OR WHEN SYSTEM CAPACITY IS LIMITED SUCH AS THE ADDITION OF A HOT TUB/ELECTRIC VEHICLE CHARGER TO EXISTING RESIDENCE SERVICE.
EEMAC 3R enclosure
Specifically designed as a load saving device, to be used where non-essential load is connected to an essential load circuit.
Load saver cuts off power to the non-essential circuit only. Reducing load saves service upgrades.
Adjustable 5 to 50 Amp of the circuit upstream rating.
Easy to install for new and existing installations, simply connect in series of the existing load.
Optional time of day clock prevents non-essential load from operation on/off hour, increasing energy savings and allowing non-essential load to operate on/off time energy availability.
Sensing has adjustable 5 to 50 second time delay action to prevent rapid load cycling. Sensing is on only L1. To avoid nuisance tripping if loads are unbalanced add second phase current sensor option.
CSA certified assembly
Ground fault load breaker class ‘A’ 5mA
Large capacity control to 600A, 600V
Dual line sensing - recommended when unbalanced loads could be encountered
Time clock for interval operation of load contactor eg. time of day